BCD996T USB Cable. - RadioReference.com Forums
2006年7月23日 — The BCD996T does not have a USB port. It has a standard RS232 DB9 port in the back, and a non-standard serial port in the front. To connect the rear connector to your computer, you need an RS232 DB9 null modem cable (or regular cable with null modem adapter).
Looking for Harris P7200 programming cable | Page 2
2024年5月19日 — The bottom line is that this all depends on the cable you have. Either you have the db25 cable with no active electronics (needs a rib), or you have the db9 cable with active electronics. I have a set of six p7100ip VHF radios and they arrived with a rib, and a db25 cable. That worked fine with any firmware/DSP I tried.
BCD396XT/BCD996XT: - Need help locating serial to usb cable for ...
2021年12月2日 — You can use this USB to serial adapter along with the existing serial cable with the 9 pin connector. I have never had any problems using this adapter with any software or scanner. Insignia™ 1.3' USB-to-RS-232 (DB9) PDA/Serial Adapter Cable Black NS-PU99501 - …
BCT15X: - BCT15X programming (cable) - RadioReference.com …
2022年5月10日 — Compared to the USB programming cable/plugs/jacks on the BCD996p2 and sds200, The BCT15X front jack & connector are flimsy. Is it just older technology? Why did Uniden use such a weak proprietary plug? As far as I can remember, the radio came with a programming cable with a female db9 connector on one end and that flimsy little plug on the ...
BCD996P2 DB9 Serial Cable - RadioReference.com Forums
2017年1月1日 — You will need an RS232 to USB Null modem cable. I purchased this one on Amazon, and it works perfectly. And with it, the scanner connection will wake up properly when the computer wakes up after going to sleep. StarTech.com 1 Port USB to Null Modem RS232 DB9 Serial DCE Adapter Cable with FTDI, Black (ICUSB232FTN )
AR8200-MK3 - Computer Interface Cable - RadioReference.com …
2022年7月10日 — The two cables are similar but the plug that goes into the receiver is a very different size for the two versions. Both versions have a female DB9 plug on the other end of the cable. I use Butel software for my AR8200 receivers and it works ok. The key is finding a DB9 to USB cable that Butel Software will recognize on a Windows 10 computer.
Cable adapter for BCD9962p/BCT15x for data transfer help
2020年3月13日 — Cable: DB9 Female to DB9 Male; Null Modem; Keyspan USB Serial to USB adapter; USB to Computer; I don't know if a device driver is needed for the Keyspan, since I may already have one on my (virtual) machine. If so, they can be downloaded.
EFJ 5300 Programming Cable | RadioReference.com Forums
2022年2月25日 — A forum thread where users discuss how to purchase or design a programming cable for EF Johnson 5300 radios. Some users share their experiences with RF Guys, eBay, and DIY options, while others offer help or advice.
usb/db9 cable for GPS? - RadioReference.com Forums
2010年6月12日 — My 996xt came with a usb/db9(serial) cable to communicate with the PC.My question is,could I use this same cable to connect from the GPS port on the back of the 996xt,which is also db9 to the usb port on my GPS unit.Are these cables wired differently than a standard cable would be? Dont wanna...
BCT15X: - BCT15X programming cable - RadioReference.com …
2023年4月6日 — Just ordered a new BCT15X. Going to use for monitoring and streaming VHF Hi and a some UHF. All Analog. Currently use a SDS200 and BCD436HP for Digital Trunk systems in adjacent county. Running Proscan. My question is what type of programming cable does it come with. It looks like from the...